GR-FOIL is a specially cold-formable mica roll with silicon impregnated and glass fiber reinforced. It’s a tearing resistant mica roll with high elasticity and high mechanical stability. It is used widely as a slip plane and coil insulation for coreless induction furnace, wrapping material for crucible form, protective barrier during sintering of lining materials. Temperature resistance is about 800- 1200°C.
Composition:
1.mica + glass fiber
2. mica + glass fiber + mica paper
3. glass fiber + mica + glass fiber
Thickness: 0.14mm (210gsm) /0.2mm (312gsm)/0.3mm(460gsm)/0.4mm(700gsm) /0.5mm(780gsm)
Width: 0.5m or 1m
Length: 20m/25m/50m/100m/200m/300m
GR-SINTER is a specially cold-formable mica roll with high temperature resistant silicon resin impregnated and glass fiber reinforced, it’s with one side or both sides non woven glass. It’s asbestos free and tearing resistant mica roll with high elasticity and high mechanical stability. It is used widely as a slip plane and coil insulation for coreless induction furnace, wrapping material for crucible form, protective barrier during sintering of lining materials. Temperature resistance is about 800- 1100°C.
Composition:
1. non woven+mica + glass fiber thickness:0.40mm
2. non woven + mica+glass fiber + mica paper+non woven Thickness: 0.40mm & 0.50mm
Width: 1m
Length: 20m/25m/50m/100m
GR-COMBI is a specially cold-formable mica roll with high temperature resistant silicon resin impregnated both soluble fiber (calcium silica) and glass fiber reinforced. It’s asbestos free and tearing resistant mica roll with high elasticity and high mechanical stability. It is used widely as a slip plane and coil insulation for coreless induction furnace, wrapping material for crucible form, protective barrier during sintering of lining materials. Temperature resistance is about 800- 1200°C.
Composition:
1.mica + glass fiber + ceramic fiber
2. glass fiber+mica+ceramic fiber
Thickness:2.3/2.4/2.5/3.3/3.4/3.5 mm (calcium silica fiber with thickness 1mm, 4mm or 5mm)
Width: 1m
Length:12.5m/25m
GR-304 Mesh
Composition: mica + stainless steel mesh + mica
GR flexible 304 mesh mica sheet is made of phlogopite mica paper with 304 stainless steel mesh inside as sandwiched between two layers of mica paper to sense and report worn out lining or metal run out, and early leakage of the molten metal through the refractory lining to an electronic control unit.
Thickness: 0.58~1 mm
Size: 980mm*600mm /980mm*1200mm
GR-304 tanged plate
Composition: mica + tanged stainless steel plate +mica
GR flexible 304 plate mica sheet is made of phlogopite mica paper with 304 stainless steel tanged plate inside as sandwiched status between two layers of mica paper to sense and report worn out lining or metal run out, and early leakage of the molten metal through the refractory lining to an electronic control unit.
Thickness: 1~1.6 mm
Size: 1000mm*600mm /1000mm*1200mm